REFERENCES
A. ASTM International:
1. ASTM D 2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated
Flooring Surfaces as Measured by the James Machine.
2. ASTM E 648 - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems
Using a Radiant Heat Energy Source.
3. ASTM E 662 - Standard Test Method for Specific Optical Density of Smoke Generated by
Solid Materials.
4. ASTM F 137 - Standard Test Method for Flexibility of Resilient Flooring Materials with
Cylindrical mandrel Apparatus.
5. ASTM F 386 - Standard Test Method for Thickness of Resilient Flooring Materials Having
Flat Surfaces.
6. ASTM F 410 - Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings
by Optical Measurement.
7. ASTM F 710 - Standard Practice for Preparing Concrete Floors to Receive Resilient
Flooring.
8. ASTM F 925 - Standard Test Method for Resistance to Chemicals of Resilient Flooring.
9. ASTM F 970 - Standard Test Method for Static Load Limit.
10. ASTM F 1303 - Standard Specification for Sheet Vinyl Floor Covering with Backing.
11. ASTM F 1700 - Standard Specification for Solid Vinyl Floor Tile.
12. ASTM F 1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of
Concrete Subfloor Using Anhydrous Calcium Chloride.
13. ASTM F 2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor
Slabs Using In Situ Probes.

SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Submit three copies of manufacturer's data sheets on each product to be used,
including:
SignaFlex Rolled Sheet Vinyl Specifications Page ? 3
1. Preparation instructions and recommendations.
2. Storage and handling requirements and recommendations.
3. Installation methods.
4. Maintenance recommendations
C. Selection Samples: For each finish product specified, two sets of each type, colors and finish of
resilient flooring and accessory required, indicating full range of color and pattern variation as proof
of application compliance.
D. Verification Samples: For each finish product specified, three complete sets of each type, colors
and finish of resilient flooring and accessory required, indicating color and pattern of actual product,
including variations, as proof of application compliance.
E. Certification: Upon request by Architect manufacturer to provide third party written test results of
physical characteristics and performance attributes performed by an independent laboratory.
F. Closeout Submittals: Submit three copies of the following:
1. Maintenance and operation data includes - methods for maintaining installed products,
and precautions against cleaning materials and methods detrimental to finishes and
performance.
2. Warranty documents specified herein.
G. Flame Spread Certification: Submit manufacturer's certification that resilient flooring furnished for
areas indicated to comply with required flame spread rating has been tested and meets or exceeds
indicated or required standard.
H. LEED Documentation Submittals:
1. LEED NC 2.2 & CI 2.0 Rating System:
a. MR 4.1 - Post Consumer 10% (post-consumer + 1/2 pre-consumer).
b. MR 4.2 - Post Consumer 20% (post-consumer + 1/2 pre-consumer).
c. EQ 4.1 - Adhesives and Sealants SCAQMD Rule #1168.
d. EQ 4.3 - FloorScore Certification in lieu of CRI.
e. ID 1.1 - Green Housekeeping Innovation Credit (inquire within) borrowing from
LEED EB IEQ 10.3.
2. LEED EB 2.0 Rating System:
a. MR 2.1 - Optimize Use of Alternative Materials; Post Consumer Recycled Content.
b. MR 3.1 - Optimize Use of IAQ Products, A. Adhesives & Sealants SCAQMD Rule
#1168.
c. MR 3.2 - Optimize Use of IAQ Products, C. FloorScore Certification in lieu of CRI.
d. MR 4 - Sustainable Cleaning Products and Services.
e. IEQ 10.3 - Green Cleaning - Low Impact Environmental Policy.
3. LEED Schools, NC & Major Renovations Rating System:
a. MR 1.3 - Maintain 50% of Interior Non-Structural Elements.
b. MR 4.1 - Post Consumer 10% (post-consumer + 1/2 pre-consumer).
c. MR 4.2 - Post Consumer 20% (post-consumer + 1/2 pre-consumer).
d. EQ 4 - Option 1 - Adhesives and Sealants SCAQMD Rule #1168.
e. IEQ 4 - Option 3 - Flooring Systems - CA 1350.
f. ID 1.1 - Green Housekeeping Innovation Credit borrowing from LEED EB IEQ 10.3.
4. LEED Retail - NC & Major Renovations Rating System:
a. MR 1.3 - Maintain 50% of Interior Non-Structural Elements.
b. MR 4.1 - Post Consumer 10% (post-consumer + 1/2 pre-consumer).
c. MR 4.2 - Post Consumer 20% (post-consumer + 1/2 pre-consumer).
d. IEQ 4 - Option 1 Adhesives and Sealants SCAQMD Rule #1168
e. IEQ 4 - Option 3 Flooring - FloorScore Certified.
f. ID 1.1 - Green Housekeeping Innovation Credit borrowing from LEED EB IEQ 10.3.
 
QUALITY ASSURANCE
A. Manufacturer Qualifications: Whenever possible, provide each type of resilient flooring and
accessories as provided by a single manufacturer, including recommended primers, adhesives,
sealants, finish accessories and leveling compounds.
B. Installer Qualifications: Minimum five years experience and completed at least three projects of
similar magnitude, material and complexity. Upon request, provide project references including
contract names and telephone numbers for three projects.
C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application
workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship, color, sheen and finished
appearance are approved by Architect.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's original unopened, undamaged packaging until ready for
installation.
B. Store all rolls standing upright; do not lay rolls down for long periods.
C. Flooring material and adhesive shall be acclimated to the installation area for a minimum of 48
hours prior to installation.

PROJECT CONDITIONS
A. Environmental Requirements/Conditions: In accordance with manufacturer's recommendations.
Areas to receive flooring shall be clean, fully enclosed, weather tight with the permanent HVAC set
at a uniform temperature of at least 68 degrees F (20 degrees C) 72 hours prior to and during and
for not less than 48 hours after installation. The flooring material shall be conditioned in the same
manner prior to installation. Ambient temperature shall not exceed 100 degrees F (38 degrees C)
after installation.
B. Close spaces to traffic during resilient flooring installation and for a period of time after installation
as recommended in writing by the manufacturer.
C. Install resilient flooring materials and accessories after other finishing operations, including painting,
have been completed.
D. Where demountable partitions and other items are indicated for installation on top of sheet resilient
flooring material, install flooring material before these items are to be installed.
E. All material shall be from the same batch and the rolls shall be installed in consecutive order. If
material from more than one batch is to be used, the job shall be laid out so that different batch
numbers are not installed side by side.

WARRANTY
A. Provide manufacturer's standard warranty against manufacturing defects and wearing.
SignaFlex Rolled Sheet Vinyl Specifications Page ? 5

 

EXTRA MATERIALS
A. Deliver to Owner extra materials from same production run as products installed. Package products
with protective covering and identify with descriptive labels. Comply with Division 1 closeout
submittals requirements.
1. Quantity: Furnish quantity of flooring units in full rolls equal to 2 percent of amount installed.
2. Delivery, Storage and Protection: Comply with Owner's requirements for delivery, storage
and protection of extra materials.

PROPRIETARY PRODUCT(S)
A. Wood Vinyl flooring for indoor commercial applications.
1. 4.5mm rolled sheet vinyl
2. 6.5mm rolled sheet vinyl
3. 8.0mm rolled sheet vinyl
B. SignaGrip adhesives for the installation of Wood Vinyl Flooring
4.5mm, 6.5mm, and 8.0mm.

Wood Vinyl - 4.5MM ROLLED SHEET VINYL
Resilient Sheet Flooring: 4.5mm feature the following characteristics:
A. Construction: High performance polyurethane top layer, clear 100%
vinyl wear layer, high-res image layer, reinforcing woven
glassfiber inner layer, closed cell foam backing
B. Reference Specification: ASTM F 1303, Type I, Grade 1.
C. Certification: Floorscore certified for Indoor Air Quality by SCS Labs.
D. Recycled Content: Minimum of 20 percent post-consumer recycled content.

Physical Data:
A. Roll Size: 1.8m width x 20m long rolls (.177” x 71” x 65.6')
Wood Vinyl flooring Rolled Sheet Vinyl Specifications
B. Weight: 3.10 kg/m2
C. Backing Class: 4-ply fused backing system that includes 1.7mm PVC
internal layer and polyester mesh backing - Class A.
D. Colors: Wood: Maple, Oak, Beech, Golden Cherry, Cherry,
Zelkova, Tiger Oak, Antique Oak,
Solid: Gray, Dark Blue, Beige, Green, Dark Green, Teal,
Red, Orange, Yellow, Sky Blue
E. Total Thickness: 4.5mm (0.177in.) (ASTM F 386)
F. Wear Layer Thickness: 0.5mm (0.02in.) (ASTM F 410)
Performance Characteristics:
A. Friction: Average 93 (NF EN 13036-4)
B. Vertical Deformation: 1.0 (EN 14809)
C. Vertical Ball Rebound: Average 99 (NF EN 12235)
D. Behavior under Rolling Load: No damage (NF EN 1569)
E. Resistance to wear: .19g (EN ISO 5470-1)
F. Specular Gloss: 25% (EN ISO 2813)
G. Resistance to Static Load: Average 0.23mm (NF EN 1516)
H. Resistance to Impact: No Damage (NF EN 1517)
I. Resistance to Repeated Impact: No Damage (TS 15122)

Wood Vinyl Flooring – 6.5MM ROLLED SHEET VINYL
Resilient Sheet Flooring: SignaFlex 6.5mm featuring the following characteristics:
A. Construction: High performance polyurethane top layer, clear 100%
vinyl wear layer, high-res image layer, reinforcing woven
glassfiber inner layer, closed cell foam backing
B. Reference Specification: ASTM F 1303, Type I, Grade 1.
C. Certification: Floorscore certified for Indoor Air Quality by SCS Labs.
D. Recycled Content: Minimum of 20 percent post-consumer recycled content.
Physical Data:
A. Roll Size: 6.5mm x 1.8m width x 15m long rolls (.256” x 71” x 49.2')
B. Weight: 4.30 kg/m2
C. Backing Class: 4-ply fused backing system that includes 1.7mm PVC
internal layer and polyester mesh backing - Class A.
D. Colors: Wood: Maple, Oak, Beech, Golden Cherry, Cherry,
Zelkova, Tiger Oak, Antique Oak,
Solid: Gray, Dark Blue, Beige, Green, Dark Green, Teal,
Red, Orange, Yellow, Sky Blue
E. Total Thickness: 6.5mm (0.256in.) (ASTM F 386)
F. Wear Layer Thickness: 0.5mm (0.02in.) (ASTM F 410)
Performance Characteristics:
A. Friction: Average 87 (NF EN 13036-4)
B. Shock Absorption: ?25%
C. Vertical Deformation: 1.0 (EN 14809)
D. Vertical Ball Rebound: Average 96 (NF EN 12235)
E. Behavior under Rolling Load: No damage (NF EN 1569)
F. Resistance to wear: .21g (EN ISO 5470-1)
G. Specular Gloss: 23% (EN ISO 2813)
H. Resistance to Static Load: Average 0.33mm (NF EN 1516)
I. Resistance to Impact: No Damage (NF EN 1517)
J. Resistance to Repeated Impact: No Damage (TS 15122)

Wood Vinyl Flooring 8.0MM ROLLED SHEET VINYL
Resilient Sheet Flooring: 8.0mm featuring the following
characteristics:
A. Construction: High performance polyurethane top layer, clear 100%
vinyl wear layer, high-res image layer, reinforcing woven
glassfiber inner layer, closed cell foam backing
B. Reference Specification: ASTM F 1303, Type I, Grade 1.
C. Certification: Floorscore certified for Indoor Air Quality by SCS Labs.
D. Recycled Content: Minimum of 20 percent post-consumer recycled content.
Physical Data:
A. Roll Size: 8.0mm x 1.8m width x 11m long rolls (.314” x 71” x 36.1')
B. Weight: 4.8 kg/m2
C. Backing Class: 4-ply fused backing system that includes 1.7mm PVC
internal layer and polyester mesh backing - Class A.
D. Colors: Wood: Maple, Oak, Beech, Golden Cherry, Cherry,
Zelkova, Tiger Oak, Antique Oak,
Solid: Gray, Dark Blue, Beige, Green, Dark Green, Teal,
Red, Orange, Yellow, Sky Blue
E. Total Thickness: 0.334in. (ASTM F 386)
F. Wear Layer Thickness: 0.02in. (0.5mm) - ASTM F 410
Performance Characteristics:
A. Friction: Average 87 (NF EN 13036-4)
B. Shock Absorption: ?25%
C. Vertical Deformation: 1.0 (EN 14809)
D. Vertical Ball Rebound: Average 99 (NF EN 12235)
E. Behavior under Rolling Load: No damage (NF EN 1569)
F. Resistance to wear: .21g (EN ISO 5470-1)
G. Specular Gloss: 22% (EN ISO 2813)
H. Resistance to Static Load: Average 0.31mm (NF EN 1516)
I. Resistance to Impact: No Damage (NF EN 1517)
J. Resistance to Repeated Impact: No Damage (TS 15122)

SIGNAGRIP ADHESIVES
A. You must use Signagrip adhesive with SignaFlex products.
B. SignaGrip 2100–solvent-free hard-setting permanent acrylic adhesive for installing heterogeneous
sheet and LVT products.
C. SignaGrip 3100–solvent-free two-part epoxy for areas exposed to topical water, heavy rolling
loads, and under hospital beds.
D. SignaGrip 5100–solvent-free, static dissipative premium acrylic flooring adhesive designed to
install static dissipative commercial grade PVC flooring.
E. SignaGrip 5500–solvent-free, 2-part hard-setting epoxy conductive adhesive specifically
formulated for the installation of Signature Sports Flooring tiles over porous and non-porous
surfaces.
F. We supplies new trowel blades with every order